Chapter 10 Link Aggregation
XGS1210-12 User’s Guide
42
CHAPTER 10
Link Aggregation
10.1 Overview
This chapter shows you how to logically aggregate physical links to form one logical and higher
bandwidth link.
Link aggregation is the grouping of physical ports into one logical higher-capacity link. You may want to
trunk ports if for example, it is cheaper to use multiple lower-speed links than to under-utilize a high-
speed, but more costly, single-port link.
10.2 Link Aggregation
Use this screen to configure static link aggregation.
Figure 25 Link Aggregation
To Next Page
Loading...
