Chapter 6 Tutorials
XGS1210-12 User’s Guide
29
2 Enter 2 in the VLAN ID field for the VLAN2 network.
3 Since the VLAN2 network is connected to port 1 on the Switch, configure port 1 to be a permanent
member of the VLAN. To ensure that VLAN-unaware devices (such as computers and hubs) can receive
frames properly, set the port’s box color to green to set the Switch to remove VLAN tags before sending.
4 Change the box color of other ports to gray.
5 Click Apply to save the settings.
To Next Page
Loading...
