100
2 Under P5 select the dmz (DMZ) radio button and click Apply.
1.2.3 Configure Zones
In this example you have created a WIZ_VPN tunnel through the Quick Setup - VPN Setup
wizard. By default, it is assigned to the IPSec_VPN zone. Do the following to move WIZ_VPN
from the IPSec_VPN zone to a new zone.
1 Click Configuration > Network > Zone and then double-click the IPSec_VPN entry.
2 Select WIZ_VPN and remove it from the Member box and click OK.
3 Back to the Configuration > Network > Zone screen and click Add in the User Configuration
section.
4 Enter VPN as the new zone’s name. Select WIZ_VPN and move it to the Member box and click
OK.
To Next Page
Loading...
