ZyXEL Communications ZyWALL USG-Series - Scenario 4 - Secure Site-To-Site Connections by Using Ipsec VPN - Ipv4 with Ikev2; Ipv6; Application Scenario; Configuration Guide

ZyXEL – USG Application Notes
17
Scenario 4 — Secure Site-to-site Connections using
IPSec VPN – IPv4 with IKEv2 / IPv6
4.1 Application Scenario
IPv4 with IKEv2
We want to use IKEv2 to establish a VPN tunnel between the HQ and Branch Office.
IPv6 (with IKEv2 only)
ISP has changed the environment to IPv6. We applied for IPv6 address pool for
internal use. So we have to change use the IPv6 address to establish an VPN tunnel
between the USG.
4.2 Configuration Guide
IPv4
Network Conditions:
USG-40W with static WAN:
- WAN IP: 59.124.163.155
- Local subnet: 192.168.100.0/24