90
Scenario 14 – WLAN Controller Function on USG
14.1 Application Scenario
USG with 4.10 firmware supports the AP controller function.
You can follow the steps to control your AP device.
14.2 Configuration Guide
Management of external AP device
(1) Add an SSID object on the device
Go to Configuration > Object > AP Profile > SSID > SSID list, and click on the “Add” button.
(2) Go to Configuration > Object > AP Profile > Radio, and click on the “Add” button to add 2.4G and 5G
radio objects, and set the SSID profile to this object.
To Next Page
Loading...
