ZyXEL Communications ZyWALL USG-Series - Tutorial 1: How to Set up Your Network; Wizard Overview; How to Configure Interfaces, Port Roles, and Zones

98
Tutorial 1: How to Set Up Your Network
Here are examples of using the Web Configurator to set up your network in the USG.
Note: The tutorials featured here require a basic understanding of connecting to and using the Web
Configurator,. For field descriptions of individual screens, see the Web Configurator Online Help.
1.1 Wizard Overview
Use the wizards to quickly configure Internet connection and VPN settings as well as activate
subscription services.
WIZARD
DESCRIPTION
Installation Setup Wizard
Use this wizard the first time log into the Web Configurator to configure WAN
connections and register your USG.
Quick Setup
You can find the following wizards in the CONFIGURATION navigation panel.
WAN Interface
Use these wizard screens to quickly configure a WAN interface’s encapsulation
and IP address settings.
VPN Setup
Use these wizard screens to quickly configure an IPSec VPN or IPSec VPN
configuration provisioning.
After you complete a wizard, you can go to the CONFIGURATION screens to configure advanced
settings.
1.2 How to Configure Interfaces, Port Roles, and Zones
This tutorial shows how to configure Ethernet interfaces, port roles, and zones for the following
example configuration.
• The wan1 interface uses a static IP address of 1.2.3.4.