ZyXEL – USG Application Notes
22
Step 7. After setting the rule, the user can select the rule and click on the Connect
button to establish the VPN link. Once the tunnel is established, a connected icon will be
displayed in front of the rule.
Step 8. When the VPN tunnel is established, the user can find the SA information on
MONITOR > VPN MONITOR > IPSec.
IPv6
Step 1. Add an IPV6 VPN phase I on USG1. Go to CONFIGURATION > VPN > IPSec
VPN > VPN Gateway.
My Address: 2002:3b7c:a397:2:ee43:f6ff:fefc:c4b3
Peer Gateway Address: 2002:3b7c:a397:2:b2b2:dcff:fe70:c1d6
Pre-Shared Key: 12345678
Step 2. Add an IPv6 VPN phase II on USG1. Go to CONFIGURATION > VPN > IPSec
To Next Page
Loading...
