ZyXEL – USG Application Notes
27
Step 3. Go to CONFIGURATION > VPN > IPSec VPN > VPN Gateway to open the
configuration screen.
Step 4. Click on the Add button to add a VPN gateway rule.
Step 5. To configure the VPN gateway rule, the user needs to fill-in:
- VPN gateway name:
- IKE Version: IKEv2
- Gateway address: both local (My Address) and peer (Dynamic Address)
- Authentication setting:
Certificate
- Phase-1 setting
Encryption and Authentication Algorithm:
1) 3DES / SHA1
2) AES128 / MD5
3) AES128 / SHA1
4) Key Group DH2
- Extended Authentication Protocol:
Enable Extended Authentication Protocol
Server Mode
AAA Method: default
Allowed User: IKEv2_users
To Next Page
Loading...
