ZyXEL – USG Application Notes
29
address object's IP address will be assigned to the Windows IKEv2 client's machine.
Step 7. Go to CONFIGURATION > VPN > IPSec VPN > VPN Connection to open the
configuration screen to configure the phase-2 rule.
Step 8. Click on the Add button to add a rule.
Step 9. To configure the phase-2 rule, the user needs to fill-in:
- VPN connection name
- VPN gateway selection
- Policy for
Local network side
- Configuration Payload
Enable Configuration Payload
IP Address Pool:
- Phase-2 setting
Active protocol
Encapsulation mode
Encryption algorithm
Authentication algorithm
Perfect Forward Secrecy
To Next Page
Loading...
