Chapter 9 Routing Protocol
ZyWALL (ZLD) CLI Reference Guide
110
9.2.5 Learned Routing Information Commands
This table lists the commands to look at learned routing information.
9.2.6 show ip route Command Example
The following example shows learned routing information on the ZyWALL.
Table 53 ip route Commands: Learned Routing Information
COMMAND DESCRIPTION
show ip route [kernel | connected | static | ospf | rip |
bgp]
Displays learned routing and other routing
information.
Router> show ip route
Flags: A - Activated route, S - Static route, C - directly Connected
O - OSPF derived, R - RIP derived, G - selected Gateway
! - reject, B - Black hole, L - Loop
IP Address/Netmask Gateway IFace Metric Flags Persist
===========================================================================
0.0.0.0/0 172.16.1.254 wan1 0 ASG -
10.59.0.0/24 0.0.0.0 ext-wlan 0 ACG -
127.0.0.0/8 0.0.0.0 lo 0 ACG -
172.16.1.0/24 0.0.0.0 wan1 0 ACG -
192.168.1.0/24 0.0.0.0 lan1 0 ACG -
192.168.2.0/24 0.0.0.0 lan2 0 ACG -
192.168.3.0/24 0.0.0.0 dmz 0 ACG -
To Next Page
Loading...
