Chapter 32 Certificates
ZyWALL (ZLD) CLI Reference Guide
263
32.5 Certificates Commands Examples
The following example creates a self-signed X.509 certificate with IP address 10.0.0.58 as the
common name. It uses the RSA key type with a 512 bit key. Then it displays the list of local
certificates. Finally it deletes the pkcs12request certification request.
Router# configure terminal
Router(config)# ca generate x509 name test_x509 cn-type ip cn 10.0.0.58 key-type rsa
key-len 512
Router(config)# show ca category local
certificate: default
type: SELF
subject: CN=ZyWALL-1050_Factory_Default_Certificate
issuer: CN=ZyWALL-1050_Factory_Default_Certificate
status: VALID
ID: ZyWALL-1050_Factory_Default_Certificate
type: EMAIL
valid from: 2003-01-01 00:38:30
valid to: 2022-12-27 00:38:30
certificate: test
type: REQ
subject: CN=1.1.1.1
issuer: none
status: VALID
ID: 1.1.1.1
type: IP
valid from: none
valid to: none
certificate: pkcs12request
type: REQ
subject: CN=1.1.1.2
issuer: none
status: VALID
ID: 1.1.1.2
type: IP
valid from: none
valid to: none
certificate: test_x509
type: SELF
subject: CN=10.0.0.58
issuer: CN=10.0.0.58
status: VALID
ID: 10.0.0.58
type: IP
valid from: 2006-05-29 10:26:08
valid to: 2009-05-28 10:26:08
Router(config)# no ca category local pkcs12request
To Next Page
Loading...
