ZyXEL Communications ZyWall - 1.6 Shortcuts and Help; 1.6.1 List of Available Commands; 1.6.2 List of Sub-commands or Required User Input

Chapter 1 Command Line Interface
ZyWALL (ZLD) CLI Reference Guide
26
1.6 Shortcuts and Help
1.6.1 List of Available Commands
A list of valid commands can be found by typing ? or [TAB] at the command prompt. To view a list of
available commands within a command group, enter <command> ? or <command> [TAB].
Figure 9 Help: Available Commands Example 1
Figure 10 Help: Available Command Example 2
1.6.2 List of Sub-commands or Required User Input
To view detailed help information for a command, enter <command> <sub command> ?.
Figure 11 Help: Sub-command Information Example
Figure 12 Help: Required User Input Example
Router> ?
<cr>
apply
atse
clear
configure
------------------[Snip]--------------------
shutdown
telnet
test
traceroute
write
Router>
Router> show ?
<wlan ap interface>
aaa
access-page
account
ad-server
address-object
------------------[Snip]--------------------
wlan
workspace
zone
Router> show
Router(config)# ip telnet server ?
;
<cr>
port
rule
|
Router(config)# ip telnet server
Router(config)# ip telnet server port ?
<1..65535>
Router(config)# ip telnet server port