Chapter 20 Application Patrol
ZyWALL (ZLD) CLI Reference Guide
171
Router# configure terminal
Router(config)# show app other config
bandwidth-graph: yes
Router# configure terminal
Router(config)# show app other rule all
index: 1
activate: yes
port: 5963
schedule: none
user: any
from zone: any
to zone: any
source address: any
destination address: any
protocol: tcp
access: forward
DSCP inbound marking: preserve
DSCP outbound marking: preserve
bandwidth excess-usage: no
bandwidth priority: 1
bandwidth inbound: 0
bandwidth outbound: 0
log: no
index: default
activate: yes
port: 0
schedule: none
user: any
from zone: any
to zone: any
source address: any
destination address: any
protocol: any
access: forward
DSCP inbound marking: preserve
DSCP outbound marking: preserve
bandwidth excess-usage: no
bandwidth priority: 1
bandwidth inbound: 0
bandwidth outbound: 0
log: no
To Next Page
Loading...
