Chapter 39 File Manager
ZyWALL (ZLD) CLI Reference Guide
315
7 Hit enter to log in anonymously.
8 Set the transfer mode to binary (type bin).
9 Transfer the firmware file from your computer to the ZyWALL. Type put followed by the path and
name of the firmware file. This examples uses put e:\ftproot\ZLD FW \1.01(XL.0)C0.db.
Figure 51 FTP Default System Database Transfer Command
10 Wait for the file transfer to complete.
Figure 52 FTP Default System Database Transfer Complete
11 The console session displays “done” after the default system database is recovered.
Figure 53 Default System Database Received and Recovery Complete
To Next Page
Loading...
