2N EasyGate Pro User Manual

User Guide 2N® EasyGate PRO
13 / 87
SIM Card Installation
Slot for SIM card is placed on the connector panel. Insert the SIM card to the slot with contacts
oriented to the front panel with LED. Make sure that the card is locked properly.
In dual SIM version is SIM1 primary slot, SIM2 secondary slot. When the connection using SIM1 is
not accessible or the signal level is lower than limit set by parameter, the SIM2 is used for
connection. During connection over SIM2 is checked the signal level for connection over SIM1 in
regular intervals set by parameter. When the signal level is sufficient, the connection is switched
back to SIM1. Connection using primary SIM is signalized by blue color of LED Mobile network,
connection using secondary SIM by yellow color.

2N EasyGate Pro Specifications

General

Mounting	DIN-rail
Device type	Cellular network gateway
Built-in display	No
Market positioning	Business
Data network	GSM
SIM interface	3 V
GSM bands supported	850, 900, 1800, 1900 MHz
USB port	Yes
USB 2.0 ports quantity	1
Antenna connector type	SMA
Input voltage	100 - 240 V
Operating temperature (T-T)	0 - 45 °C

Weight and Dimensions

Dimensions (WxDxH)	163 x 157 x 38 mm