User Guide 2N® EasyGate PRO
P100 retrying Function No.: 975
Not implemented in EasyGate!
Specify number of retrying in case of unsuccessful attempt of P100 connection.
Setting options: 0-10 (0 = no retry)
Default setting: 0
Multiple Lift1 on FXS line Function No.: 966
You can connect up to 3 Lift1 on one phone line. This feature is licensed, please contact
technical support.
Setting options: Disabled/Enabled
Default setting: Disabled
Checking SMS [Days] Function No.: 967
You can specify, how often gateway sends Checking SMS. 0 means no checking SMS. If this
feature is switched on, you will get SMS after gateway start, in case of SIM switch on dual SIM
gateway and then after specified number of days.
Setting options: 0-10 (0 = no checking SMS)
Default setting: 0
Telephone number for service SMS
Telephone number for service SMS. The number is common for GGMC SMS, for "LOW CREDIT"
SMS on prepaid SIM cards and for battery status SMS. To be set in part Service, not here.
SIP parameters (optional)
These functions are not implemented.
Voice over LTE - VoLTE (optional)
APN pro IMS Function No.: 721(SIM2-771)
APN (Access Point Name) of operator's IMS. Leave it blank in most cases, it will be filled from
selected profile file.
Setting options: 0-40 characters
Default setting: blank
APN pro SOS Function No.: 722(SIM2-772)
To Next Page
Loading...
