User Guide 2N® EasyGate PRO
Default setting: 0
Date for automatic refill (Function No.: 311)
The day in month, when all four banks of free minutes will be refilled with predefined values.
The refilling is done in time 00:00:01 of selected day. When the date for refill doesn't exist (31. 2.),
the refill is done first day after this date (1. 3.).
Setting options: 0–31 (0 – function off)
Default setting: 0
Next automatic refill – information field
Minutes available till the end of billing period.
Free minutes (Function No.: 32x)
The number of minutes that will be used to refill banks. The selection x is 1 to 4, according to
bank number.
Setting options: 0–65535
Default setting: 0
Initial time (Function No.: 33x)
Initial time interval in seconds, which is charged for every call, although the call is shorter. The
selection x is 1 to 4, according to bank number.
Setting options: 0–255
Default setting: 0
Time step (Function No.: 34x)
The minimal time interval to be counted (for example 60 seconds means, that after initial call
time every beginning minute will be counted). The selection x is 1 to 4, according to bank
number.
Setting options: 0–255
Default setting: 0
Remaining minutes – information field
Minutes available till the end of billing period
Commands – direct access
Setting of the date and time
The time and date is set according to information from GSM (UMTS) network, if this service is in
network supported. When the service is not accessible, the user has to set the time when the
gateway is first used or switched off for longer time period (there is backup for clock, which
supports correct clock for approximately 10 hours without power).
To Next Page
Loading...
