2N Helios IP Installation Manual

2N® Helios IP Safety Components and Associated Products
1.3
7
1.3 2N
®
Helios IP Safety Components and
Associated Products
Basic Units
9152101
1 button
9152101W
1 button, 10W
loudspeaker, IP69K
2N
®
Helios IP Safety is designed for outdoor applications and requires no additional roof. W-
including Part Nos. are intended for WAP pressure cleaning and extremely noisy
environments (such as highways, etc.).
2N
®
Helios IP Safety units can wall mounted without requiring any additional accessories.
Use the appropriate mounting box (see below) for plasterboard and flush mounting.

2N Helios IP Specifications

General

Type	IP Intercom
Connectivity	Ethernet
Tamper Switch	Yes
Audio	Full duplex
Microphone	Built-in
Speaker	Built-in
Camera	Yes
Power Supply	PoE
Operating Temperature	+60°C
Ingress Protection	IP54
Protocols	SIP, RTSP, ONVIF
Audio Codec	G.711, G.722
Installation	Surface mount, flush mount (depending on model)