2N Helios IP Installation Manual

44 pages

To Next Page

To Previous Page

Before You Start

2.1

2.1 Before You Start

Product Completeness Check

Please check the contents of your 2N

Helios IP Safety delivery:

1 2N

Helios IP Safety (selected model)

1 Torx 10 / Torx 20 double-ended wrench

1 spare sealing for big bushing for a thick cable, one hole

1 big blank with nut

1 this manual

1 mounting template

4 screws 5x80 mm

4 “intelligent” 8x50 mm dowels

Notes

 Mounting frame is not included – it is sold separately as order no.

9152000.

 Bushing set is the same as for 2N

Helios IP Force, but bushings are

already mounted.

Other manuals for 2N Helios IP

Need help?

Do you have a question about the 2N Helios IP and is the answer not in the manual?

General

Type	IP Intercom
Connectivity	Ethernet
Tamper Switch	Yes
Audio	Full duplex
Microphone	Built-in
Speaker	Built-in
Camera	Yes
Power Supply	PoE
Operating Temperature	+60°C
Ingress Protection	IP54
Protocols	SIP, RTSP, ONVIF
Audio Codec	G.711, G.722
Installation	Surface mount, flush mount (depending on model)