Recessed mounting – hollow bricks
What You Need:
Frame 9152000
Brick flush mounting box, Part No. 9151001
Hole: 132 x 223 x 83mm
Flush mounting – plasterboard wall
What You Need:
Frame 9152000
Plasterboard flush mounting box, Part No.
9151002
Hole: 118 x 235mm
Caution
The warranty does not apply to the product defects and failures arisen as
a result of improper mounting (in contradiction herewith). The
manufacturer is neither liable for damages caused by theft within an area
that is accessible after the attached electric lock is switched. The product
is not designed as a burglar protection device except when used in
combination with a standard lock, which has the security function.
When the proper mounting instructions are not met, water might get in
and destroy the electronics. It is because the intercom circuits are under
continuous voltage and water infiltration causes an electro-chemical
reaction. The manufacturer’s warranty shall be void for products damaged
in this way!
To Next Page
Loading...
Need help?
General
