2N Helios IP Documentation

Helios IP – Documentation Page 7
SIP Account Setting
Set the SIP account in the intercom to enable outgoing calls to a defined phone number. Select
Telephone in the Services menu. Refer to the figure below for an example of functional setting.
Figure 3: SIP Account Setting

2N Helios IP Specifications

General

Type	IP Intercom
Connectivity	Ethernet
Tamper Switch	Yes
Audio	Full duplex
Microphone	Built-in
Speaker	Built-in
Camera	Yes
Power Supply	PoE
Operating Temperature	+60°C
Ingress Protection	IP54
Protocols	SIP, RTSP, ONVIF
Audio Codec	G.711, G.722
Installation	Surface mount, flush mount (depending on model)