2N Helios IP Documentation

Helios IP – Documentation Page 13
Preparation of Integration Tests
Necessary Components
The integration tests require the following components:
Component
Count of
components
Device with a web browser and LAN access
1 or more
Helios IP intercom
1
Ethernet cables
4 or more
External power supply for Helios IP if no PoE is available
1
Sip Proxy
1
IP phone
1
Table 9: Necessary Components
The following items are required for Central Unit running, management and configuration:
Item
Count of
items
C4 installation
1
C4 User Manual
1
This documentation
1
Table 10: C4 Requisites
Device Tree Creation
1. Create a bus controller with device URL and Account and Password values set according to the
Helios IP HTTP API login data.
2. Create an output under the bus controller with ID as set for the Helios IP switch.

2N Helios IP Specifications

General

Type	IP Intercom
Connectivity	Ethernet
Tamper Switch	Yes
Audio	Full duplex
Microphone	Built-in
Speaker	Built-in
Camera	Yes
Power Supply	PoE
Operating Temperature	+60°C
Ingress Protection	IP54
Protocols	SIP, RTSP, ONVIF
Audio Codec	G.711, G.722
Installation	Surface mount, flush mount (depending on model)