2N Helios IP Documentation

Helios IP – Documentation Page 9
Driver Info
Function
Communication reinitialisation, run and stop

Event download from device

Outgoing call to defined number

Outgoing call hang-up

Switch control

Table 2: Driver Info
The driver allows you to log the following events in the device:
Event
Switch state change

Card tapping on card reader

Device state

Audio loop test result

Call state change

Table 3: Event Logging
Driver History
Date
Version
Description
01/07/2015
1.0.1
Driver first version
31/07/2015
1.0.2
Compatibility with integration tests
03/08/2015
1.0.3
Additional test compatibility
18/09/2015
1.0.4
Adjusted for the new API
22/10/2015
1.0.5
Bug fix
12/11/2015
1.0.9
Bug fix
Table 4: Driver History
Hardware Components and Versions
Supported firmware version: 2.13

2N Helios IP Specifications

General

Type	IP Intercom
Connectivity	Ethernet
Tamper Switch	Yes
Audio	Full duplex
Microphone	Built-in
Speaker	Built-in
Camera	Yes
Power Supply	PoE
Operating Temperature	+60°C
Ingress Protection	IP54
Protocols	SIP, RTSP, ONVIF
Audio Codec	G.711, G.722
Installation	Surface mount, flush mount (depending on model)