RegistrationStateChanged
The block defines the event generated at a SIP account RegistrationStateChanged
registration state change. Set the SIP registration in Services / SIP 1 and SIP 2.
Registration gets changed whenever the intercom is switched on, configuration is
changed or registrar connection gets lost, for example.
Input parameters
– select the account for which events are to be monitored.Account
Valid values:
1 – account 1
2 – account 2
Any – any account
The parameter is optional, the default value is .Any
– set the registration state that generates the event.State
Valid values:
– intercom not registeredUnregistered
– registration in progressRegistering
– intercom is registeredRegistered
– unregistration in progressUnregistering
– any state changeAny
The parameter is optional, the default value is .Any
Output parameters
Event – the Event invoke connected Event or Action.
Account – select the account for which events are to be monitored.
State – set the registration state that generates the event.
Example
Event generated when the intercom has been unregistered (whenever the registrar
failed to respond to a periodical registration request):
To Next Page
Loading...
Need help?
General
