Pannoramic DESK 1.18.1 User’s Guide 3 Preparing Slides
To remove a slide:
1. Click in Pannoramic DESK control software. The specimen holder moves to the
load/unload position
2. Open the slide insert door (1) by pushing it to the left.
3. Open the fixing lever (2) by pulling it to the left.
4. Remove the slide (4).
5. Insert another slide or close the fixing lever (2) and the door (1).
Note:
The slide insert door is equipped with an interlock switch. It
automatically stops a running digitization process when the slide insert
door is opened.
May 29, 2014 – Rev. 1 3DHISTECH Ltd. 25(77)
To Next Page
