3D Systems, Inc.
p/n: 15-D100, rev. D
WARNING: ONLY PERFORM A PROCESS FILTER
CHANGE WHEN THE SYSTEM IS NOT IN ABNORMAL
CONDITION, E.G. NOT WHEN A VACUUM CYCLE,
INERT PREPARATION CYCLE OR COOL DOWN CYCLE
WAS CANCELLED BY AN EMERGENCY STOP OR
ABORTED.
WARNING: IT IS FORBIDDEN TO USE THE SAME
PROCESS FILTER FOR DIFFERENT POWDER
FAMILIES. IT IS MANDATORY TO CHANGE THE
PROCESS FILTER WHEN CHANGING FROM ONE
MATERIAL FAMILY TO ANOTHER. PROCESS FILTERS
CAN BE REUSED WITHIN THE SAME MATERIAL
FAMILIY AS LONG AS THEY DO NOT EXCEED
DESIGNATED RUNNING HOURS.
A. Centering Rings
To Next Page
Loading...
