Need help?Do you have a question about the 3D Systems BFB-3000 and is the answer not in the manual?
General| Brand | 3D Systems |
|---|---|
| Model | BFB-3000 |
| Category | 3D Printers |
| Language | English |
Instructions on how to remove any test prints from the build bed.
Ensures the print bed is free from any residual build material before operation.
Verifies that the print bed is properly seated and secured on the machine.
Detailed steps for safely removing the print bed from the machine.
Steps for correctly re-installing the print bed onto the machine.
Guide on how to connect and turn on the printer's control panel and power supply.
Instructions to ensure the extruder nozzles are clean and free from plastic residue.
Details the process of ensuring the print bed is perfectly level for optimal printing.
Guides on setting the correct vertical distance between the nozzles and the bed.
Step-by-step instructions for preparing and loading filament into the extruders.
Instructions for running a pre-loaded test file to print a sample model.
Detailed instructions for manually moving the printer's axes for precise adjustments.
Re-checking and adjusting the bed level after initial setup.
Fine-tuning the nozzle's starting height for optimal first layer adhesion.
To Next Page