3D Systems BFB-3000 User Manual

BFB-3000 Set Up and Operations Manual
Document No: D100253 16
6.3.2 Fit the bed
 Tip: fitting is easier if the bed is near the bottom of the machine. If it is too high, you
can manually lower the z-axis (see “Manual move”, page 18).
 Check all bolt heads are fitted correctly (see “Check the bed is fitted correctly”,
page 14).
2
2
3

3D Systems BFB-3000 Specifications

General

Brand	3D Systems
Model	BFB-3000
Category	3D Printers
Language	English