3D Systems BFB-3000 User Manual

BFB-3000 Set Up and Operations Manual
Document No: D100253 13
6.2 Check the bed is clear of any build material
Ensure that all build material is completely removed from the bed. Use the model removal
tool to remove any stuck-fast tracks.
It is normal for prints to leave marks on the bed, and for the model
removal tool to lightly scratch the surface of the bed. This will not
affect the printer’s operation. However, take care to avoid gouging the
surface with the material removal tool – the bed must be flat.
Clean: no build
material debris

3D Systems BFB-3000 Specifications

General

Brand	3D Systems
Model	BFB-3000
Category	3D Printers
Language	English