3D Systems BFB-3000 User Manual

BFB-3000 Set Up and Operations Manual
Document No: D100253 21
6.7 Check the bed is level
To get a good print, the bed must be level.
We make every effort to level the bed before the machine leaves our factory. However, the
bed may move in transit, therefore it is essential to check that the bed is still level.
The print bed is mounted on three sprung bolts which allow adjustment of the bed height in
three places.
Bed bolt 3
Bed bolt 1
Bed bolt 2
Bed

3D Systems BFB-3000 Specifications

General

Brand	3D Systems
Model	BFB-3000
Category	3D Printers
Language	English