3D Systems BFB-3000 User Manual

BFB-3000 Set Up and Operations Manual
Document No: D100253 14
6.3 Check the bed is fitted correctly
Ensure that bed is correctly fitted to the printer. The three bed bolt heads should sit flush in
the countersinks. If not, remove the bed, then refit it - as shown in the next two sections.
Bed bolt 3
Bed bolt 1
Bed bolt 2
Bed
Bed bolt head
in countersink

3D Systems BFB-3000 Specifications

General

Brand	3D Systems
Model	BFB-3000
Category	3D Printers
Language	English