3D Systems ProX 800 Original Instructions

3D Systems, Inc.
11
Crated Specications Uncrated Specications
Width Depth Height Weight Width Depth Height Weight Weight range
w/ resin
Description cm (in) cm (in) cm (in) kg (lb) cm (in) cm (in) cm (in) kg (lb) kg (lb)
ProCure 750 UV
Chamber
154
(60.8)
138
(54.5)
172.7
(68)
522 (1150) 148
(58.3)
120
(47.2)
178
(70.1)
431 (950) n/a
MDM 800-50mm
95 liters
137 (54) 183 (72) 112 (44) 181 (400) 79 (31) 142 (56) 79 (31) 136 (300) 247-307
(543-675)
MDM 800-275mm
272 liters
137 (54) 183 (72) 112 (44) 181 (400) 79 (31) 142 (56) 79 (31) 136 (300) 437-627
(961-1380)
MDM 800-550mm
414 liters
137 (54) 183 (72) 112 (44) 181 (400) 79 (31) 142 (56) 79 (31) 136 (300)
597-888
(1314-1953)
Weight and Dimensions - System Components (continued from pg. 10)
Inspect Exterior of Printer
Visually inspect the exterior of the printer for any damage incurred during shipping. Notify 3D Systems Service immediately if
anything is evident at this point. DO NOT proceed with the installation until you have discussed the damage with Service.
Inspect ShockWatch
®
Indicator
Check the ShockWatch indicators (towards top of crate and at bottom of crate).
If indicator(s) are red:
1. Do not refuse shipment.
2. Make notation on delivery receipt and inspect the container for signs of damage.
3. If damage is discovered, leave item in original container and packaging, and request immediate inspection from carrier
within 15 days from delivery date.
If indicator is not red, machine is cleared to uncrate by a 3D Systems Field Service Engineer or an authorized reseller.

3D Systems ProX 800 Specifications

General

Brand	3D Systems
Model	ProX 800
Category	3D Printers
Language	English