6
3.3 Table of Warnings
3-SAFETY (continued)
2014 June
7000r-7000r3 Pro - NA
Figure 3-4
Figure 3-2
Figure 3-3
• To reduce the risk associated with
mechanical and electrical hazards:
− Read, understand, and follow all safety
and operating instructions before
operating or servicing the case sealer.
− Allow only properly trained and qualifi ed
personnel to operate and service this
equipment.
WARNING
WARNING
WARNING
WARNING
• To reduce the risk associated with
hazardous voltage:
− Position electrical cord away from foot and
vehicle traffi c.
• To reduce the risk associated with
pinches, entanglement and
hazardous voltage:
− Turn electrical supply off and
disconnect before performing any
adjustments, maintenance or servicing
the machine or taping heads.
• To reduce the risk associated with
pinches and entanglement hazards:
− Do not leave the machine running while
unattended.
− Turn the machine off when not in use.
− Never attempt to work on any part of
the machine, load tape, or remove
jammed boxes from the machine while
the machine is running.
Figure 3-4
To Next Page
Loading...
