59
Part Number Option/Accessory
70-0064-2998-2 Caster Kit Attachment
70-0067-5966-9 Conveyor Extension Attachment
78-8069-3926-6 Low Tape Sensor Kit
70-0064-4963-4 AccuGlide™ 3 Upper Taping Head - 2 inch, Type 10800
70-0064-4962-6 AccuGlide™ 3 Lower Taping Head - 2 inch, Type 10800
70-0064-4965-9 AccuGlide™ 3 Upper Taping Head - 3 inch, Type 10800
70-0064-4964-2 AccuGlide™ 3 Lower Taping Head - 3 inch, Type 10800
70-0064-1097-4 Tape Application Monitor (TAM)
70-0064-1104-8 Tape Application Monitor - Tape Outboard
78-8095-4854-4 Tape Edge Fold Attachment - Upper Head 2 inch
78-8095-4855-1 Tape Edge Fold Attachment - Lower Head 2 inch
70-0067-3769-9 Filler Plate - Lower
For additional information on the options and accessories listed below, contact your 3M Representative.
Options and Accessories
PARTS - 7000r-7000r3 Pro Random Case Sealer, Type 11400
Frame Assemblies
To Order Parts:
1. Refer to first illustration, Frame Assemblies, for the Figure Number that identifies a specific portion of the
machine.
2. Refer to the appropriate Figure or Figures to determine the parts required and the parts reference number.
3. The Parts List that follows each illustration, includes the Reference Number, Part Number and Part
Description for the parts on that illustration.
Note – The complete description has been included for standard fasteners and some commercially available
components. This has been done to allow obtaining these standard parts locally, if desired.
4. Order parts by Part Number, Part Description and Quantity required. Also include the model/machine name,
machine type, and serial number that are located on the identif cation plate.
5. Refer to the first page of this instruction manual “Replacement Parts and Service Information” for
replacement parts ordering information.
Important – Not all the parts listed are normally stocked items. Some parts or assemblies shown are
available only on special order. Contact 3M/Tape Dispenser Parts to conf rm item availability.
2014 June
7000r-7000r3 Pro - NA
To Next Page
Loading...
