3M 40800 - Intended Use

1
Intended Use
The intended use of the AccuGlide™ 3 Upper and
Lower Taping Heads - 3 Inch- is to apply a "C" clip
of Scotch
®
pressure-sensitive fi lm box sealing tape
to the top and/or bottom center seam of regular
slotted containers.
These taping heads are incorporated into most
standard 3M-Matic™ case sealers. The compact
size and simplicity of the taping head also makes
it suitable for mounting in box conveying systems
other than 3M-Matic™ case sealers. This includes
replacement of other types of taping, gluing or
stapling heads in existing case sealing machines.
The AccuGlide™ 3 Taping Heads have been
designed and tested for use with Scotch
®
pressure-
sensitive fi lm box sealing tape.
AccuGlide™ 3 Upper Taping Head - 3 Inch, Type 10800
AccuGlide 3 – 3 Inch Taping Head Assemblies
AccuGlide 3 Taping Head - 3"
2009 February