EasyManua.ls Logo

3M 40800 - 3-SAFETY; 3.1 General Safety Information & Signal Words

3M 40800
146 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
3-SAFETY
2010 January
700rks-NA
3.1 General Safety Information
Read all the instructions carefully before starting
work with the machine; please pay particular atten-
tion to sections marked by the symbol:
The machine is provided with a LATCHING EMER-
GENCY STOP BUTTON (Figure 3-1); when this
button is pressed, it stops the machine at any point
in the working cycle. Maintain clear access to power
cord while machine is operating. Disconnect plug
from power source before machine maintenance
(Figure 3-1). Also disconnect air if the machine has
a pneumatic system. Keep this manual in a handy
place near the machine. This manual contains infor-
mation that will help you to maintain the machine in
a good and safe working condition.
3.2 Explanation of Signal Word and
Possible Consequences
Indicates a potentially hazardous
situation, which, if not avoided,
may result in minor or moderate
injury and/or property damage.
CAUTION:
Indicates a potentially hazardous
situation, which, if not avoided,
could result in death or serious
injury and/or property damage.
WARNING:
This safety alert symbol identifi es
important messages in this manual.
READ AND UNDERSTAND THEM
BEFORE INSTALLING OR
OPERATING THIS EQUIPMENT.
Figure 3-1
STOP

Table of Contents

Related product manuals