29
Figure 10930 – Upper and Lower Heads
AccuGlide 3 Taping Head - 3"
2009 February
Ref. No. 3M Part No. Description
10930-1 78-8137-3302-5 Link – R/H Assembly
10930-3 78-8137-3314-0 Shaft – Pivot, Buffi ng
10930-4 78-8017-9082-1 Bearing – Special 30 mm
10930-5 78-8017-9106-8 Screw – Bearing Shoulder
10930-6 26-1003-5829-5 Screw – Hex Hd, M6 x 12
10930-7 78-8137-3305-8 Spacer – Applying Pivot
10930-8 78-8137-3313-2 Shaft – Pivot, Applying
10930-9 78-8137-6151-6 Washer - Flat, 6.5 ID x 15 OD x 0.5 Thk
To Next Page
Loading...
