57
16.3 Spare Parts Order
16-TECHNICAL DOCUMENTATION AND INFORMATION (continued)
2010 January
700rks-NA
Replacement Parts Ordering Information and Service
Refer to the fi rst page of this instruction manual "Replacement Parts and Service Information".
Tool Kit
A tool kit, part number 78-8076-4950-0, is supplied with the machine. The kit contains the necessary open end
and hex socket wrenches for use with the metric fasteners on the case sealer. The threading tool, part number
78-8076-4726-4, contained in above kit is also available as a replacement stock item.
Label Kit
In the event that any labels are damaged or destroyed, they must be replaced to ensure operator safety.
A label kit, part number 78-8098-9177-9 is available as a stock item. It contains all the safety labels used on
the 700rks Random Case Sealer.
The following parts are normal wear items and should be ordered and kept on hand as used.
Qty. Part Number Description
4 78-8070-1531-4 Belt – Drive W/Pin
In addition, a tool/spare parts kit supplied with the 700rks Random Case Sealer contains the following spare parts:
Qty. Part Number Description
1 78-8137-3311-6 Spring – Upper Extension
1 78-8137-3312-4 Spring – Lower Extension
2 78-8028-7899-7 Knife – 89mm/3.5 /Inch
4 78-8052-6602-6 Spring – Cutter
2 78-8070-1531-4 Belt-Drive W/Pin
All the above listed parts can be ordered separately and when used should be ordered and kept on hand for
spares.
Also see Section II for recommended taping head spare parts.
To Next Page
Loading...
