3M Clean-Trace User Manual

1.
3.
3M™ Clean-Trace™ Hygiene Monitoring
and Management System Quick Start Guide
EN
Consisting of 3M™ Clean-Trace™ Luminometer and
3M™ Clean-Trace™ Hygiene Management Software
PACKAGE CONTENTS
1. 3M™ Clean-Trace™ Luminometer
2. 3M™ Clean-Trace™ Hygiene Management
Software (Stored on 3M Clean-Trace Luminometer)
3. 3M™ Clean-Trace™ Luminometer Base
4. Power supply with interchangeable country plugs
5. USB 2.0 mini-A communications cable
6. 3M Clean-Trace Hygiene Monitoring and
Management System Quick Start Guide
7. 3M™ Clean-Trace™ Hygiene Monitoring
and Management System Important
Information booklet
8. Certificate of Conformity
1. Read and follow all Safety Information in the 3M Clean-Trace Hygiene
Monitoring and Management System Important Information booklet
2. 3M™ Clean-Trace™ Hygiene Monitoring and Management
System User Manual
Available at www.3M.com/CleanTraceLM1manual
3. Charge the 3M Clean-Trace Luminometer for at least 2 hours
before initial use.
Select appropriate power supply adapter; connect cord to power supply,
connect power supply to 3M Clean-Trace Luminometer
4. Confirm your computer meets the minimum requirements
• Microsoft® Windows® 7
(32-bit or 64-bit), or Microsoft®
Windows® 8 (32-bit or 64-bit)
or Microsoft® Windows® 8.1
(32- or 64-bit)
• 2.0 GHz Intel Pentium 4
or similar processor
• 1 GB RAM
• 10 GB of free disk space
• USB 2.0 compatible
IMPORTANT! Complete steps 1-4 before Installing and Launching
3M Clean-Trace Hygiene Management Software
5. Connect USB cable to computer and power on 3M Clean-Trace
Luminometer by depressing the Power button ( ) for 3 seconds.
6. Install the 3M Clean-Trace Hygiene Management Software by
following the installation instructions located at
www.3M.com/CleanTraceLM1manual in the 3M Clean-Trace
Hygiene Monitoring and Management System User Manual
KR BR EU
IN
US/JP/CA AR
CN
GB AU
Disclaimer: 3M disclaims all express and implied warranties including
warranties of merchantability or fitness for a particular use. If product is
defective, the exclusive remedy is, at 3M’s option, replacement, or refund.
Except where prohibited by law, 3M will not be liable for any further loss or damage arising
from use of this product.
User Responsibility: Users are responsible for familiarizing themselves with product
instructions and information. Visit our website at www.3M.com/foodsafety, or contact your
local 3M representative or distributor for more information.

3M Clean-Trace Specifications

General

Detection Method	Bioluminescence
Display	LCD
Measurement Range	0 to 9999 RLU
Resolution	1 RLU
Connectivity	USB
Power Source	Rechargeable battery
Operating Temperature	5°C to 40°C
Technology	ATP bioluminescence
Units of Measure	RLU (Relative Light Units)
Storage Conditions	Dry, cool place