3M MP220 - Page 112

112
3M
™
Pocket Projector MP220
© 2012 3M. All Rights Reserved.
4 Use the onscreen keyboard to modify the content of the cell.
Modify using the Menu button:
1 Select the cell by placing the mouse pointer over the cell and pressing the
Touch Sensor.
2 Press the Menu button.
3 Select Edit and then Edit Cell.
4 Use the onscreen keyboard to modify the content of the cell.
5 Press Back to exit the onscreen keyboard.
6 Press Back again to exit the formula bar.
Trackball Mode
Modify using the formula bar:
1 Select the cell by moving your finger across the Touch Sensor in the direction
of the cell and press the Touch Sensor.
2 Use the onscreen keyboard to modify the content of cell.
Modify using the context menu:
1 Select the cell by moving your finger across the Touch Sensor in the direction
of the cell and press and hold the Touch Sensor. The context menu will
appear.
2 Select Edit Cell.
3 Use the onscreen keyboard to modify the content of the cell.
Modify using the Menu button:
1 Select the cell by moving your finger across the Touch Sensor in the direction
of the cell.
2 Press the Menu button.
3 Select Edit and then Edit Cell.
4 Use the onscreen keyboard to modify the content of the cell.
5 Press Back to exit the onscreen keyboard.
6 Press Back again to exit the formula bar.