25
3M
™
Pocket Projector MP220
© 2012 3M. All Rights Reserved.
Initial Setup
The first time you switch on your MP220, you will need to set up your locale and the
date & time.
Setting your Locale
To set the locale, click Locale. This chooses the language that the projector's
interface and menus display. The following screen will appear. Click on your locale.
If your locale does not appear on the screen, you may have to scroll down.
Note: You can customize some parts of the projector's interface, such as the
tabs on the Home Screen, that do not change with this setting.
To Next Page
Loading...
