13
3M
™
Pocket Projector MP220
© 2012 3M. All Rights Reserved.
Getting Started
Power Adapter
The power adapter is used to charge the battery or power the projector. There
are four outlet adapters to give you the flexibility to power the 3M MP220 in most
countries.
When the power adapter is first shipped, it is fitted with a blank outlet adapter. This
must be removed before installing an outlet adapter.
Installing an Outlet Adapter onto the Power Adapter
1 Press the "PUSH" button on the underside of the power adapter.
2 Remove the blank outlet adapter by sliding up.
3 Select the outlet adapter that will plug into your wall outlet and align to the
power adapter.
4 Slide the outlet adapter down until it clicks into place.
To Next Page
Loading...
Need help?
General
