EasyManua.ls Logo

3M Ranger 245 - Initial Equipment Check; Model 245 Blood;Fluid Warming System; Model 247 Irrigation Warming System; Indications for Use

3M Ranger 245
22 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ranger Blood and Fluid Warming Systems
English
4
Arizant Healthcare Inc.
Initial Equipment Check
Make sure the 3M
TM
Ranger
TM
unit’s power cord is plugged into the unit�
When checking for grounding, clamp to the screw threads on the units IV� pole clamp or the
equipotential stud on the rear of the unit� Clamp should be tightened securely
Sometime during shipping, this unit may have been exposed to extreme temperatures� e unit
may need a period of 20 minutes or more to return to normal operating temperature� Store the
Ranger unit at room temperature, allowing it to equilibrate, before using or testing the unit�
Introduction
e Ranger warming system includes a warming unit and a disposable administration set� e
Ranger warming unit is designed to be mounted to an I�V� pole� A handle located on the top of
the unit makes transport easy� When mounted to the I�V� pole, the unit ts easily above the 3M
TM
Bair Hugger
TM
500 or 700 series warming unit�
mOdel 245 BlOOd/fluid warming SySTem
e Ranger blood/uid warming system is designed to warm blood, blood products, and liquids and
deliver these at ow rates from KVO to 500 mL/min� At these ow rates, the device maintains uid
output temperatures ranging from 33°C to 41°C (Note: is is for room temperature uids only)� It
takes less than two minutes to warm up to the 41°C ±1 set point temperature� e alarm points on the
Model 245 are 43°C ±1 and 46°C [+3, -C]�
Disposable blood/uid sets are available for standard ow, high ow, and pediatric applications�
Disposable sets are sterile, latex-free, single-use-only items and are designed to be used with the
reusable warming unit� Do not use other disposable sets with the Model 245, including those
designed for the Model 247 irrigation warming system
mOdel 247 irrigaTiOn warming SySTem
e Ranger irrigation warming system is designed to warm irrigation uids and deliver these
at ow rates from 0 to 865 mL/min when the bag is hung 100 cm above the scope� At these ow
rates, the device maintains uid output temperatures ranging from 33°C to 41°C (Note: is is for
room temperature uids only)� It takes less than two minutes to warm up to the 41°C ±1 set point
temperature� e alarm points on the Model 247 are 48°C (±2) and 50°C (±2)�
e Ranger irrigation uid warming disposable set is sterile, latex-free, and is designed to be used
with the reusable Ranger irrigation uid warming unit� Do not use other disposable sets with the
Model 247, including those designed for the Model 245 blood/uid warming system�
indicaTiOnS fOr uSe
Blood/Fluid Warming SyStem
e Ranger blood/uid warming system is intended to warm blood, blood products, and liquids
irrigation Fluid Warming SyStem
e Ranger irrigation uid warming system is intended to warm irrigation uids

Other manuals for 3M Ranger 245

Related product manuals