Table 1-1 Special Presets
Preset Function Preset Function
33 Auto flip 92 Start to set limit stops
34 Back to initial position 93 Set limit stops manually
35 Call patrol 1 94 Remote reboot
36 Call patrol 2 95 Call OSD menu
37 Call patrol 3 96 Stop a scan
38 Call patrol 4 97 Start random scan
39 Day mode (IR cut filter in) 98 Start frame scan
40 Night mode (IR cut filter out) 99 Start auto scan
41 Call pattern 1 100 Start tilt scan
42 Call pattern 2 101 Start panorama scan
43 Call pattern 3 102 Call patrol 5
44 Call pattern 4 103 Call patrol 6
45 One-touch Patrol 104 Call patrol 7
90 Wiper 105 Call patrol 8
Figure 4-7 Special Preset
NOTE: You may need to use the OSD (On Screen Display) menu when controlling the camera remotely. To
display the OSD menu on the live view screen, you can call the preset number 95.
SETTING/CALLING A PATROL
NOTE: No less than 2 presets must be configured before you set a patrol.
Steps:
1. Click to enter the patrol configuration interface.
2. Select a path No., and click to add the configured presets.
3. Select the preset, and input the patrol duration and patrol speed.
4. Click OK to save the first preset.
5. Follow the steps above to add the other presets.
To Next Page
Loading...
Need help?
General
