3xLogic VISIX S-Series User Manual

VISIX S-Series Network Camera | USER MANUAL v6.0
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
90
Left-click an IP address from filter list and click Delete.
► Delete all IP Addresses
Click Clear to delete all the IP addresses.
5. Click to save the settings.
Configure Security Service Settings
Steps:
1. Enter the Security Service interface:
Configuration> System > Security > Security Service
2. Toggle the checkbox to enable the Illegal Login Lock function.
Illegal Login Lock: Enabling illegal login lock function is to automatically lock the device IP after the admin
user performing 7 failed password attempts (5 attempts for the user/operator).
3. Click to save the settings.
USER MANAGEMENT
15). Enter the User Management interface: Configuration > System > User Management
The admin user has access to create, modify or delete other accounts. Up to 32 user accounts can be created.
Figure 6-55 User Information
► Add a User
Steps:
1. Click to add a user.
2. Input the new User Name, select Level and input Password.
Warning:
 For your privacy and to better protect your system against security risks, we strongly recommend the
use of strong passwords for all functions and network devices. The password should be something of
your own choosing (Using a minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters.) in order to
increase the security of your product.
 Proper configuration of all passwords and other security settings is the responsibility of the installer
and/or end-user.

3xLogic VISIX S-Series Specifications

General

Brand	3xLogic
Model	VISIX S-Series
Category	Security Camera
Language	English