5. Click to save the settings.
NOTE: These two functions are not enabled by default.
6.4 Configuring System Settings
SYSTEM SETTINGS
Viewing Basic Information
Enter the Device Information interface: Configuration > System > System Settings > Basic Information
In the Basic Information interface, you can edit the Device Name and Device No.
Other camera information such as Model, Serial No., Firmware Version, Encoding Version, Web Version,
Plugin Version, Number of Channels, Number of HDDs, Number of Alarm Input, Number of Alarm Output,
and Firmware Version Property are displayed. The information cannot be changed in this menu. It is the
reference for maintenance or modification in future.
Figure 6-41 Device Information
Time Settings
Purpose:
Follow the instructions in this section to configure the timestamp to be displayed on the video. There are Time
Zone, Time Synchronization, and Daylight Saving Time (DST) functions for setting the time. Time
Synchronization consists of auto mode by Network Time Protocol (NTP) server and manual mode.
Steps:
1. Enter the Time Settings interface: Configuration > System > System Settings > Time Settings
To Next Page
Loading...
Need help?
General
