USER’S MANUAL OF WNAP 3G MOBILE ROUTER Version: 2.0
21
3.3.6 Wireless - Security Setup
This page allows you setup the wireless security. Turn on WEP, WPA, WPA2 by
using encryption keys could prevent any unauthorized access to your wireless
network.
Screen snapshot – Wireless Security Setup
Item Description
Select SSID Select the SSID from multiple APs.
Encryption Select the encryption supported over wireless access. The encryption
method can be None, WEP, WPA, WPA2 or WPA-Mixed
Refer to 4.9 What is WEP?
4.15 What is Wi-Fi Protected Access (WPA)?
4.16 What is WPA2?
Use 802.1x Authentication While Encryption is selected to be WEP.
Click the check box to enable IEEE 802.1x authentication function.
Refer to 4.17 What is 802.1x Authentication?
Authentication Type Click to select the authentication type in Open System, Shared Key
or Auto selection.
Key Length Select the WEP shared secret key length from pull-down menu. The
length can be chose between 64-bit and 128-bit (known as “WEP2”)
keys.
The WEP key is composed of initialization vector (24 bits) and
secret key (40-bit or 104-bit).
Key Format Select the WEP shared secret key format from pull-down menu. The
format can be chose between plant text (ASCII) and hexadecimal
(HEX) code.
To Next Page
Loading...
Need help?
General