USER’S MANUAL OF WNAP 3G MOBILE ROUTER Version: 2.0
32
3.3.11 WPS
This page allows you to change the setting for WPS (Wi-Fi Protected Setup).
Using this feature could let your wireless client atomically synchronize its
setting and connect to the Access Point in a minute without any hassle.
Screen snapshot – Wi-Fi Protected Setup
Item Description
Disable WPS Click on to disable the Wi-Fi Protected Setup function.
WPS Status Show WPS status is Configured or UnConfigured.
Self-PIN Number Fill in the PIN Number of AP to register the WDS access capability.
Push Button Configuration The Start PBC button provides tool to scan the wireless network. If
any Access Point or IBSS is found, you could connect it
automatically when client join PBC mode.
Apply Changes Click the Apply Changes button to complete the new configuration.
Reset Click the Reset button to abort change and recover the previous
configuration setting.
Current Key Info
Authentication：It shows the Authentication is opened or closed.
Encryption：It shows the Encryption mode.
Key：It shows the Encryption key.
Client PIN Number Fill in the Client PIN Number from your Client sites.
To Next Page
Loading...
Need help?
General