USER’S MANUAL OF WNAP 3G MOBILE ROUTER Version: 2.0
28
I Access Control List for Mesh Network
If you choose ‘Allowed Listed’, only those mesh nodes whose wireless MAC
addresses are in the access control list will be able to connect to Mesh network.
When ‘Deny Listed’ is selected, those mesh nodes in the list will not be able to
create connections.
Screen snapshot – Access Control List for mesh Network
Item Description
Mode : Click the radio button to select Disable, Allow or Deny the List.
MAC Address Fill in the MAC address of AP to register the wireless distribution system access
capability.
Comment Fill in the comment tag for the registered AP.
Apply Changes Whenever users change setting or add rules to the ACL, they need to apply this
button to commit changes.
Reset It restores the original values of “Mode” and cleans the text fields of “MAC
Address” and “Comment”.
Delete Selected Click to delete the selected MAC address that will be removed from the list
Delete All Click to delete all the registered entries from the list.
Reset Click the Reset button to abort change and recover the previous configuration.
To Next Page
Loading...
Need help?
General