AA4C AA-2PFP45 - 3.6.4 Risk Due to Vehicle Movement; 3.6.5 Risk of Vehicle Falling from Lift; 3.6.6 Slipping

USER’S MANUAL
Fig. 19
3.6.4 RISK DUE TO VEHICLE MOVEMENT
Movement may be caused during operations, which
involve force sufficient to move the vehicle. (Fig. 20) If
the vehicle is of considerable dimensions or weight,
movement may lead to overload or unbalancing. All
measures must be taking to avoid such an occurrence.
Fig. 22
NEVER LEAN OBJECTS AGAINST THE POSTS OR
LEAVE THEM IN THE AREA WHERE MOVING
PARTS ARE LOWERED.
This could hamper lowering or cause the vehicle to fall
from the rack. (Fig. 23)
Fig. 23
Fig. 20
3.6.6 SLIPPING
3.6.5 RISK OF VEHICLE FALLING FROM LIFT
This risk may arise due to spillage of lubricants in the
This risk could be caused by the incorrect positioning on
surrounding area. (Fig. 24)
the arm disk support plates (Fig. 21) or in incorrect
NEVER BOARD THE VEHICLE AND/OR TURN THE
ENGINE ON WHEN LIFT IS RAISED. (Fig. 22)
Fig. 24
-9-